Cold Saw Machine

Description

Used / In Good Condition
SERIOUS INQUIRES ONLY!!!
Sold As Is
PRICE: ,500.00
The Quantum Macc NTA 370 Vertical Double-Column Fully-Automatic Cold Saw has a moveable head that can move up to 45 degrees right and left; and the head also has rotation stops at 45° - 0° - 45°. The NTA 370 has a vice that is complete with an anti-burr device, and a motor pump for blade lubrication. This unit is equipped with a bar stop, bar support arm, and service tools, as well as the machine's manual. The NTA 370 can store up to 9 programs, each of them with 99 steps for a total of about 890 cutting positions with relevant piece-counter.
Cage is removable, can be placed back. Has been removed for easier access.
Cycle start is obtained by pressing the relevant start pedal. The machine performs the following operations during the cutting cycle:
Feeding of Material.
Closing of Vice and Fixed Vice will Lock.
Activation of Blade Motor, Rotation of the Blade and Delivery of Coolant.
Cutting Head Begins Down-Stroke. (While the head is descending to make the cut, the Feeding Carriage will return to the fixed measure - preparing itself for the next step of feeding the material).
Completes Cut & Head Returns to Initial Position as Blade Motor and Coolant Stops.
The Vice will then Open (if there is another step, the step feeder will then begin to feed).
(REPEAT)
NTA 370 COLD SAW CUTTING CAPACITIES:
Round Tube Cutting Capacities:
Round Tube Cutting at 90° (Straight Cut): 3"
Round Tube Cutting at 45° Left: 3"
Round Tube Cutting at 45° Right: 3"
Square Tube Cutting Capacities:
Square Tube Cutting at 90° (Straight Cut): 3"
Square Tube Cutting at 45° Left: 3"
Square Tube Cutting at 45° Right: 3"
Solid Round Cutting Capacities:
Solid Round Cutting at 90° (Straight Cut): 3"
Solid Round Cutting at 45° Left: 3"
Solid Round Cutting at 45° Right: 3"
Rectangular Tube Cutting Capacities:
Rectangular Tube Cutting at 90° (Straight Cut): 3-7/8" x 3"
Rectangular Tube Cutting at 45° Left: 3-7/8" x 3"
Rectangular Tube Cutting at 45° Right: 3-7/8" x 3"
NTA 370 COLD SAW SPECIFICATIONS:
? Blade Size Used:
370 x 2.5 x 32mm Bore HSS Blade
? Cost Per 370mm Blade:
0 Each
? 2 Speeds:
25 & 50 R.P.M.
? Weight:
1,985 lbs. (900 kg.)
? Maximum Vice Opening:
7.2? (185mm)
? Step Feeder Stroke Length:
23.60?
? Overall Dimensions:
138? Width x 48? Length x 75? Height (3500 x 1200 x 1900 mm)
?
The NTA 370 can store up to 9 programs, each of them with 99 steps for a total of about 890 cutting positions with relevant piece-counter.
?
Tempered and ground vertical slider along with Tempered and ground vice jaws
?
Head lowering adjustment.
?
Equipped with the Shave breaker and Vice complete with Anti-Burr Device.
Contact for any questions:
Cell: nine one seven - four one seven- five nine nine eight